 |
JOBO Bottles come in a variety of sizes. Please
refer to the following chart to select the appropriate storage container. All bottles
2500ml and less have a "writeable" area for you to make notes with a grease
pencil. |
| Item# |
Description |
Special
Features |
| 3370 |
600ml Scaled Bottle Black |
|
| 3371 |
600ml Scaled Bottle, White |
|
| 3380 |
600ml Bottle Kit (3 white,
1 black) |
Price Savings |
| 3372 |
1000ml Scaled Bottle, Black |
|
| 3373 |
1000ml Scaled Bottle, White |
|
| 3381 |
1000ml Bottle Kit (4 white,
2 black) |
Price Savings |
| 3374 |
2000ml Scaled Bottle, Black |
|
| 3375 |
2000ml Scaled Bottle, White |
|
| 3376 |
2500ml Scaled Bottle, Black |
|
| 3377 |
2500ml Scaled Bottle, White |
|
| 3336 |
5-Liter Bottle, White |
|
| 3389 |
15-Liter Bottle, White,
w/Drain Spigot |
Includes floating lids,
wide mouth |
 Back To Top
Where to Buy?
 |
The JOBO Color Control Card #6817 helps you
identify precisely measured color and gray values. This compact card is affordably priced
against the competition, and folds into a small 4.5x7" pocket size. |
Back To Top
Where to Buy?
 |
JOBO Film Clips come in two versions: The #3312
Roll-Film Clip comprised of a weighted clip (bottom) and a non-weighted clip (top). Both
clips have piercing pins to hold your film securely. The #3524 Sheet-Film Clips come in
packages of 10 ea. For best results, use a JOBO Film Dryer like the Mistral II. |
- Back To Top
Where to Buy?
 |
The JOBO Sheet Film Clips #3524 are designed to
hold your sheet film while drying. For best results, use with a heating, filtered dryer
like the Mistral II. |
- Back To Top
Where to Buy?
 |
The JOBO Film Washer #3350 tanks the drudgery
out of the final rinse. No more standing there dumping and filling rinse water every 30
seconds. Place your 1500 or 2500 series tank in a sink, insert the Film Washer, and walk
away. After about five minutes, you can come back and claim your evenly washed film.
(Note: If you also use a JOBO Lift,
please remember to run a couple changes of water through it to clean out any residual
bleach/fix to be on the safe side.) |
- Back To Top
Where to Buy?
 |
The Focus Scope #6781 is a light-weight,
inexpensive focusing magnifier that ensures accurate focusing even with the smallest lens
aperture. Also, the adjustable eyepiece allows you to adjust it for your sight. |
- Back To Top
Where to Buy?
 |
JOBO Graduates (shown with funnels) come in the
following sizes: |
| Item# |
Description |
Special
Comments |
| 3301 |
25ml Graduate |
Measuring increments 1/8oz,
1 ml |
| 3302 |
50ml Graduate |
Measuring increments 1/4oz,
2 ml |
| 3303 |
100ml Graduate |
Measuring increments 1/4oz,
5 ml |
| 3304 |
250ml Graduate |
Measuring increments 1/4oz,
5 ml |
| 3305 |
500ml Graduate |
Measuring increments 1/2oz,
10 ml |
| 3306 |
1000ml Graduate |
Measuring increments 1/2oz,
25ml |
| 3308 |
260ml Graduate (without
base) |
These graduates are for use
with manual processors CPE-2, CPA-2,
and CPP-2. 260ml Graduate not pictured. |
| 3318 |
260ml Graduate Kit (4
grads) |
Volume savings |
- Back To Top
Where to Buy?
 |
Loupes allow you to evaluate film (or prints)
properly. In any darkroom, they are a must to make sure the density, color, and sharpness
are all accurate. Loupes are available in three magnifications: 3x,
4x, and 8x. 3x Loupe #3544
Color: Black. Suitable for films up to 6x7cm. Includes a solid hood for
evaluating films, and a translucent hood for evaluating prints.
4x Loupe #3543
Color: Gold. Suitable for 24 and 35mm films. Includes a solid hood for
evaluating films, a translucent hood for evaluating prints, and a neck strap.
8x Loupe #3625
Color: Gold. Suitable for 24 and 35mm films. Includes a solid hood for
evaluating films, a translucent hood for evaluating prints, and a neck strap. |
- Back To Top
Where to Buy?
 |
The NOVA Ring-a-round #200024 allows you to
create a test 8x10" print with seven different color filtrations or exposure times.
This helps you get to the correct filtration and density quickly. |
- Back To Top
Where to Buy?
 |
New from NOVA Darkroom
Products is the Step and Repeat #200043. A common problem with testprinters is while they
allow you to develop a variety of exposures on a single sheet of paper, they don't always
make it easy to evaluate the filtration changes because different parts of an image are
used. The Step and Repeat testprinter takes the
guesswork out of color filtration adjustment by allowing you to expose up to six different
color filtrations of the same portion of an image. Once you've exposed the sample image
area, simply move the paper up a notch for additional exposures.
Also, the Step and Repeat is designed to use either a 5x7" or
half-sheet of 8x10" paper to limit waste. |
- Back To Top
Where to Buy?
Processor clean II is a non-hazardous, environmentally safe
cleaner for color and black and white processors. It helps to keep algae in check, along
with breaking up mineral deposits that can damage the mechanical parts of your processor.
The cleaner is available in two sizes; a 4oz sample pack #4136 and a 4.7lb jug #4135.
Mixing and application instructions are included on the package label.
| Processor Clean Volumes (by processor) |
| Processor |
Developer |
Fixer |
Wash |
Waterbath |
| Fujimoto CP51 |
7oz |
4.5oz |
2.5oz |
n/a |
| Fujimoto CP31 |
2.5oz |
1.5oz |
1.0oz |
n/a |
| PrintLabs |
7oz |
4.5oz |
2.5oz |
n/a |
| ATL-3000 |
n/a |
n/a |
n/a |
14oz |
| ATL-2x00, CPP-2, CPA-2 |
n/a |
n/a |
n/a |
7oz |
| CPE-2 Plus |
n/a |
n/a |
n/a |
4oz |
| NOVA
8x10" |
1.5oz |
1oz |
.5oz |
n/a |
| NOVA 12x16" |
3oz |
2oz |
1oz |
n/a |
| NOVA 16x20" |
6oz |
4oz |
2oz |
n/a |
- Back To Top
Where to Buy?
 |
The JOBO Roller Base #1509 helps you process in
the daylight with JOBO drums at room temperature. If you don't need temperature control,
yet would like daylight operation the Roller Base is for you. (The roller base does not
come with any tanks or drums). |
- Back To Top
Where to Buy?
 |
If you've ever spilled a tray of developer on
your floor, or wished you had a drain for your temperature-controlled water bath think
about getting the Siphon Pump #4045. Simply put the main tube into the liquid you want to
drain, point the drain tube to the drain or container, and squeeze the bulb until the
liquid starts flowing -- from then on the gravitational siphoning effect will take over
until you interrupt it, or the fluid has all been pumped. |
- Back To Top
Where to Buy?
 |
There are a variety of thermometers to choose
from: |
| Item# |
Description |
Special Features |
| 3320 |
Black and White Thermometer |
Up to 30 deg C with +/1 2.0 deg
resolution |
| 3321 |
Color Thermometer |
+/- 0.2 deg C resolution |
| 3323 |
B/W Angle Thermometer |
Attaches to trays. Up to 30 deg C with
+/1 2.0 deg resolution |
| 3353 |
18" Precision Thermometer (C) |
|
| 3355 |
18" Precision Thermometer (F) |
|
- Back To Top
Where to Buy?
 |
Use the Tray Siphon Kit #3351 (with the Film
Washer #3350) to convert your trays to running water washing systems. |
- Back To Top
Where to Buy?
 |
JOBO trays are made from a
durable plastic. They incorporate deep grooves to make it easy to grip
prints (with tongs). They all have slots designed into the bottom to secure your
process thermometer. A molded pouring spout makes draining your trays a breeze. The high
sides help prevent splashing and allow for more solution depth (so you don't have to
restock the chemicals as often). |
| Size |
Beige |
White |
Red |
| 5x7" |
#3110 |
#3111 |
#3112 |
| 8x10" |
#3124 |
#3125 |
#3126 |
| 11x14" |
#3140 |
#3141 |
#3142 |
- Back To Top
Where to Buy?
 |
Depending on your application, there are three
different water panels from which to choose: |
| Item# |
Description |
Special
Features |
Used
With Processor |
| 4189 |
Water Panel I |
Has special diverter valve
to allow cold water supply to temporarily flow as tempered. |
ATL-1, ATL-2, ATL-2 Plus,
ATL-2000, ATL-2200, ATL-2300, ATL-2400, ATL-2500, ATL-3, and
ATL-3000 |
| 4190 |
Water Panel II |
Has vacuum-breaker valves,
flow meter. |
ATL-1000, ATL-1500, Fujimoto CP31 and CP51, and PrintLab 3502, 3503, 3503R, and 3504 |
| 4236 |
Water Panel III |
Has diverter valve, vacuum
breaker valves, flow meter, pressure compensating temp valve, and built-in filtration. |
All JOBO processors |
| 4167 |
AutoLab Water Heater Kit |
Provides a tempered water
supply for all AutoLab-class processors. Only a cold water supply is needed. |
ATL-1, ATL-2, ATL-2 Plus,
ATL-2000, ATL-2200, ATL-2300, ATL-2400, ATL-2500, ATL-3, and
ATL-3000 ATL-1000, ATL-1500 |
- Back To Top
Where to Buy?
 |
The JOBO Film Wiper #3530 is guaranteed not to
scratch your film when used properly. It has eight neoprene-rubber contact points to the
film with a built-in safety latch to prevent you from squeezing too hard. Suitable for
35mm and medium-format roll films. |
- Back To Top
Where to Buy?
 |
The JOBO Print Wiper #4122 is designed to
delicately wipe off excess water from the emulsion of your prints, which helps to prevent
spotting and uneven drying. |
- Back To Top
Where to Buy?
|
