 |
 |
ATL-500 and ATL-800 Processors
ATL-800 Processor Contents:
- Visit the AutoLab Online Gallery
- Product Summary
- Key Features
- Technical Specifications/Capacities
- What's a less expensive alternative? What's the next step up?
- Where to buy?
Product Summary:
The ATL-500 and ATL-800 processors are the newest addition to the AutoLab product line. These compact, table-top processors are designed for low-volume E-6, C-41, and B/W darkrooms and labs. The capacities of the processors are 2 rolls 35mm/36exp, 2 rolls of 120, 1 roll of 220, or up to 6 sheets of 4x5" film.
Key Features
Push a button and walk away
After you've loaded your film, simply attach the tank to the processor, select the program, press START, then walk away. The AutoLabs will automatically start tempering the chemicals and be ready to start in under 15 minutes. If you want the ATL-500 or ATL-800 to pretemper the chemicals so it will start immediately when you're ready, they have a pre-temper option you can select.
Low-Capacity
These new inexpensive AutoLabs are designed for the darkroom or lab that only needs 1-4 rolls of film per day. If you need to develop larger quantities of film on a regular basis, please consider purchasing a larger AutoLab like the ATL-1500 or ATL-2200. Another benefit of the small capacity is the small footprint of the processor, measuring just 17x14". The ATL-500 and ATL-800 processors can be installed on a small stand, on the counter top, or even bolted to the wall.
You need it now!
Like the other JOBO AutoLabs, when your film must be processed NOW, you're covered. You'll no longer have the unneeded hassle of putting the film in containers, driving to the lab (which is particularly annoying during rush hour), dropping off the film, driving back to work, then going to pick up the film the next morning.
No Water Panel or Battery Backup Required
Both the ATL-500 and ATL-800 processors include a built-in water heater for the rinse steps, and a built-in battery backup module to prevent against power failure. These included features save you money.
Technical Specifications/Capacities:
Technical Specification
ATL-800 ATL-500 Item Number
4237 4235 LxWxH 17x14x47" 16x14x16" Weight 56lbs 26.5lbs Water Pressure 15-90 psi 15-90psi Includes: Chemical refilling rack • Chemical reclamation rack • Film tank for 2x 35mm, 2x 120, 220 • • Film tank for 1x 35mm • • Built-in rinse water heater •
• Complete installation kit • • Built-in battery backup • • Maximum filling quantity 3x 600ml 3x 600ml Used for E-6, C-41, B/W • • Semi-automatic filling from 5-Liter Storage Bottles • Capacities: 35mm/36exp (per run) 2 Rolls 2 Rolls 120 Medium Format (per run) 2 Rolls 2 Rolls 220 Medium Format (per run) 1 Roll 1 Roll 4x5" Sheet Film (per run) 6 Sheets 6 Sheets
What's a less expensive alternative? What's the next step up?
For a comparison of all rotary-style processors, please click here. The processors immediately below the ATL-500 and ATL-800 Processors is the CPP-2 Processor.
The processor immediately above the ATL-500 and ATL-800 Processors is the ATL-1500 Processor.
Send mail to info@omegasatter.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 06/04/04