 |
 |
ATL-2200, ATL-2300, ATL-2400, ATL-2500
ATL-2300 Processor
Contents:
- Visit the AutoLab Online Gallery
- Product Summary
- Key Features
- Technical Specifications/Capacities
- Processing Costs
- What's a less expensive alternative? What's the next step up?
- Where to buy?
Product Summary:
If you need 10-48 rolls of 35mm film (or equivalent) processed every day on average, this is the right processor for you. If you need less film developed, consider the ATL-1500, if you need to develop large prints and film consider the CPP-2. For higher capacities of film, consider the TecnoLab processors.
The ATL-2200, ATL-2300, ATL-2400 and ATL-2500 Processors are distributed in the U.S.A. through our standard dealer network. Additionally, some dealers have been trained to install the processors. This installation is extremely helpful because in addition to installation, you'll also be trained on how the processor operates, and how to program it. For a list of Authorized Installing Dealers please refer to the JOBO Dealer Section (please note Servicing Dealers are the highest level dealership we have and they are automatically qualified to handle installations).
Differences Between the Models Model 2200 2300 2400 2500 Floor standing with 15-liter chemical reclamation Optional Yes Maximum bottle capacity 1000ml 1500ml Automatic refill of chemical bottles No Rear Bank Front Bank Inline tempering of refill chemicals n/a No Yes Number of chemical steps available for processes 1 bank of 6 bottles 2 banks of 6 bottles Predominant process* Color (low volume) Equal color and B/W B/W Color Automatic Temperature Compensation (ATC)** No Yes *Note: All AutoLabs will develop both color and B/W, however, choose a given model based on your predominant use of a process to obtain the most efficient results. **Note: The new AutoLab models 2300/2400/2500 have a rack that hangs from the rear of the processor to develop B/W film. Also, while you're developing your B/W film at room temperature the processor will continue to heat the color chemicals in the in-line bottles.
Key Features
Push a button and walk away
After you've loaded your film, simply attach the tank to the processor, select the program, press START, then walk away. (The AutoLabs have twelve user-programmable programs, so you can setup your common processes in memory for future use).
Ultra-high quality
The AutoLab Processors develop your roll-film and prints exceptionally well. Exceptional is OK, but for unbelievable processing of sheet film, use the Expert Drums. They'll give you the best quality processing you've ever seen. The unique design of the drums gives you completely random chemical agitation, which gives you completely even processing over the entire film.
You need it now!
When your film must be processed NOW, you're covered. You'll no longer have the unneeded hassle of putting the film in containers, driving to the lab (which is particularly annoying during rush hour), dropping off the film, driving back to work, then going to pick up the film the next morning.
The next time you're stuck in traffic on the way to the lab -- please take a moment to consider your alternatives.
While I currently use the ATL-3 processor primarily for E-6 dupes, I processed virtually all types of film. There were times when I ran the AutoLab 24 hours straight without any problem. The money saved from rush fees and the time saved rushing back and forth from the lab alone has paid for the processor time and time again. - Cesare Bonazza
Technical Specifications/Capacities:
AutoLab Film and Print Capacities Models ATL-22/23/2400 Model ATL-2500 Film Material Per Run Chem Amt Per Run Chem Amt 35mm/36exp 8 1000ml 12 1500ml 120 10 1000ml 14 1500ml 220 5 1000ml 7 1500ml 70mm / 5' 3 1000ml 4 1500ml 4x5" - Reel system 18 1000ml 24 1500ml 4x5" - Expert system 10 330ml 10 330ml 5x7" and 8x10" 5 1000ml 5 1500ml Custom up to 16x20" Depends, e-mail tech@jobo-usa.com for more information. Print Material Per Run Chem Amt Per Run Chem Amt 4x5" (Easel required) 24 300ml 24 300ml 8x10" 6 300ml 6 300ml 11x14" 2 120ml 2 120ml 16x20" 1 210ml 1 210ml 20x24" 1 300ml 1 300ml
AutoLab Technical Specifications Dimensions (models 22/2300) 46x20x24" (LWH) Dimensions (models 24/2500) 46x20x48 (LWH) Power requirements 115V, 1,000 watts, 9 amps (available special-order in 220V) Water requirements Supply of cold tap water for water bath. Supply of tempered water for rinse steps. Min/max water pressure - 15 p.s.i. (1 bar)/ 90 p.s.i. (6 bar) Drain requirements Drain terminates in std. 1.5 PVC pipe. (When plumbing the drain, allow 1 foot rise for every 10 feet of run.) Weight (empty, models 22/2300) 78 lbs. (35 kgs) Weight (empty, models 24/2500) 223 lbs. (101 kgs) Tempering bath capacity 4.25 gallons (16 liters) Solution capacity Model 2200 - Six 1-liter bottles in-line, six 1-liter bottles (to pre-temper chemical).
Model 2300 - Twelve 1-liter bottles in-line.
Model 2400 - Twelve 1-liter bottles in-line, six 15-liter bottles storage.
Model 2500 - Six 1.5-liter bottles in line (auto refill bottles), six 1-liter bottles inline, six 15-liter bottles storage.Processing temperatures Adjustable from 19.9 deg C to 49.9 deg C (67.8-121.8 deg F) accurate to within +/-0.1 deg C.
Processing Costs:
These costs are calculated at the suggested list prices for Tetenal chemicals. Depending on what price you ultimately pay for chemicals, the costs per roll and sheet will vary. If you would like help determining what your actual costs will be, please e-mail sales@jobo-usa.com with what you currently pay for your chemical, and we'll reply with the cost-table.
Processing Costs for Film and Prints
Process
Size / Format "Cost Per"
ATL-2200
ATL-2300
ATL-2400"Cost Per"
ATL-2500"C-41 Color Negative Film
35mm/36exp $1.60 $1.67 120 $1.29 $1.43 220 $2.58 $2.87 4x5" Reel System $0.72 $0.83 4x5" Expert System $0.44 $0.44 5x7" $0.76 $0.76 8x10" $1.69 $1.69 Custom Depends, Contact JOBO E-6 Color Positive Film
Tetenal E-6 5-Liter 6-Bath Kit #109342 35mm/36exp $2.40 $2.50 120 $1.92 $2.14 220 $3.84 $4.29 4x5" Reel System $1.07 $1.25 4x5" Expert System $0.66 $0.66 5x7" $1.14 $1.14 8x10" $2.52 $2.52 Custom Depends, Contact JOBO RA-4 Prints from Color Negatives
Tetenal RA-4 5-Liter Kit #109318 4x5"* $0.11 $0.11 8x10" $0.44 $0.44 11x14" $0.53 $0.53 16x20" $1.91 $1.91 20x24" $2.73 $2.73 *4x5" Print capacity assumes use of #6810 Varioformat Easel
View the online instruction manual.
Accessories
Qty Item# Description Comments 1 4266 Tempered Water Supply Wand 1 4268 Battery Backup Module 1 4189 Water Mixing Panel I 1 1051 Roll-Film Kit 1 3010 4x5" Expert Drum (10 sheets) 1 3005 8x10" Expert Drum (5 sheets) 1 3360 Foot Pump 1 109318 Professional PK RA-4 Chemicals, 5-Liter (for example) You can use virtually anyone's chemical. The Tetenal line of chemicals is the one JOBO recommends and knows best. 1 3523 Roll-Film Dryer 1 3522 Sheet-Film Cabinet 1 3063 Print Drum, 20x24"
What's a less expensive alternative? What's the next step up?
For a comparison of all rotary-style processors, please click here. The processors immediately below the ATL-2x00 AutoLabs are the ATL-500 or ATL-800, ATL-1500 or CPP-2 .
Send mail to info@omegasatter.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 06/04/04