9. Electrical Connection
PrintLab 3504
230 V 3500 W
- Use only a grounded outlet!
- Never use an extension cord!
- Use a Ground Fault Circuit Interrupt (G.F.C.I)!
- Never connect other units to the same power circuit!
General safety advice
The person responsible for installation and maintenance
should be thoroughly familiar with the machine. This should also include knowing how to
work with chemicals. The instructions from the chemical manufacturers should be observed
carefully.
Wear appropriate protective goggles in case of repairs.
Always disconnect the power cord and protect the machine against unintentional
reconnecting before starting repairs. Do not bypass or disconnect built-in protective
devices. Substitute electrical components only with the same rated parts only if
replacement is necessary.
Authorized and experienced service technicians should do all
repair work and service.
Previous | Next