6. Installation

Leveling of the machine is important. Failure to do so properly might result in:

• An overflow of solutions
  
• Incomplete emptying of the baths
  
• Processing faults

 

If original overflow containers are not used, the end pieces of the hoses should under no circumstances dip into the discarded solution. The tanks may otherwise overflow.

If the drain hose sags, or lacks ventilation, the rinse water cannot drain and may overflow into the Bleach Fix.

 

Previous | Next

---

If you have any questions, contact us utilizing one of the following methods:

Equipment or Processing Questions:

Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.com

Repair Questions:

Phone: Repair Department (734) 205-9420

e-mail: repair@jobo-usa.com

---

JOBO Contacts

Telephone (734) 677-6989

Fax: (734) 677-6963

 

Postal address

P.O. Box 3721, Ann Arbor, MI 48106

Shipping Address

4401 Varsity Drive, Suite D, Ann Arbor, MI 48108

Electronic mail

Sales: sales@jobo-usa.com

Equipment & Processing Questions:  tech@jobo-usa.com
Repair Information: repair@jobo-usa.com

Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com

 

Back to Top

 

---

Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.

 

This page last updated on 03/20/02