 |
 |
4. Preparations For Installation
Switching on the unit without filling the tanks can damage the unit!
1. Carefully remove all packing materials from cover, racks and tanks.
2. Set unit up according to installation instructions.
3. Place adapters on water hose and drain hose.
4. Turn machine on while pressing the Fl-Key. Choose the desired language in the service menu
5. Choose the desired program in the set-menu (only required if program 1 RA-4 is not desired)
6. Run a functional test (with water in all cubitainers).
7. Start cleaning program (F1, ENTER, Press arrow down, ENTER, and ENTER)
8. Empty cubitainers and fill in chemicals
9. Press start button.
If you have any questions, contact us utilizing one of the following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.comRepair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
JOBO Contacts
- Telephone (734) 677-6989
- Fax: (734) 677-6963
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
Back to Top
Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 03/20/02