 |
 |
Instructions for the
PrintLab 3503R
13. Menu Step
1 Software version: also shows the processed surface area in m2
2 Main menu: possibilities of modification
3 Display of consumption: shows the actual program
4 Stan: return to standard display
5 CD-replenisher: shows remaining quantity of replenisher, can be adjusted to the actual volume of cubitainers
6 BX-Replenisher: shows remaining quantity of replenisher, can be adjusted to the actual volume of cubitainers
7 SET-Menu: Change and modify programs
8 Service Menu: several service functions
9 Program: Choose channels 1through 10, then ENTER
10 Process: Choose name from list (RA-4/B/W)
11 Time: processing time per tank
12 Temperature of CD: temperature of tank 1, adjustable
13 Temperature of BX: temperature of tank 2, adjustable
14 Drying Temperature: drying temperature adjustable
15 CD-Replenisher: adjust Volume of replenisher tank 1 per m2
16 BX-Replenisher: adjust volume of replenisher tank 2 per m2
17 Water: adjust water volume per m2
18 Language: Choose desired language (D = German, GB = English, F = French, E = Spanish)
19 Sensors: ON/OFF (OFF - transport motor works continuously)
20 Replenisher rate: ON/OFF (Replenishment system is turned off, only calculation of surface area for water rinsing is active)
21 LCD-Light: Brightness of display adjustable.
22 Cal. of CD-Temperature sensor: Sensor of tank 1 can be calibrated. Only for service technicians!
23 Cal. of BX-Temperature sensor: Sensor of tank 2 can be calibrated. Only for service technicians!
24 Cal. of CD-Replenisher pump: Calibrate replenisher pump for tank 1. Menu-guided.
25 Cal. of BX-Replenisher pump: Calibrate replenisher pump for tank 2. Menu-guided.
26 W-L/Menu I To edit: Adjust flow rate. Only for Service technicians!
27 Sensor status: Shows sensor active or passive ( * - ).
28 Temperature sensors: Only for service technicians!
29 Transport motor: ON/OFF
30 Valve control: All valve positions can be selected. Only for service technicians!
31 Water magnetic valve: ON/OFF
32 CD-Heater: Turns on heater for a short time.
33 BX-Heater: Turns on heater for a short time.
34 Dryer-Heater: Turns on heater for a short time.
35 Dryer Ventilation: ON/OFF
36 Circulation Pump: ON/OFF (only with tanks full).
37 Replenisher pump CD: ON/OFF replenisher pump Tank 1.
38 Replenisher Pump BX: ON/OFF replenisher pump Tank 2.
39 System Check: Service function
40 Self-check: ON/OFF
If you have any questions, contact us utilizing one of the following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.comRepair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
JOBO Contacts
- Telephone (734) 677-6989
- Fax: (734) 677-6963
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
Back to Top
Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 03/20/02