navcol.gif (19377 bytes)

banner_fybi.gif (12152 bytes)
Support Pagebar

 

PRINTLAB

3502

INSTRUCTION

MANUAL

 

 

 

Copyright © 2001 by JOBO Fototechnic, Inc. All rights reserved. No portion of this book may be reproduced in any form without express written consent from JOBO Fototechnic, Inc.

 

 

5. Installation Diagrams

 

Leveling of the processor is very important. Failure to do so might result in:

  • an overflow of the solutions

  • incomplete emptying of baths

  • processing faults

 

 

 

The five hose connections shown above, are labeled as follows:

  • CD fill and drain

  • BX fill and drain

  • Wash water drain

  • BX overflow

  • CD overflow

 

 

 

 

 

 

 

Next / Previous


If you have any questions, contact us utilizing one of the following methods:

Equipment or Processing Questions:

Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.com

Repair Questions:

Phone: Repair Department (734) 205-9420
e-mail: repair@jobo-usa.com

JOBO Contacts

Telephone (734) 677-6989
Fax: (734) 677-6963
 
Postal address
P.O. Box 3721, Ann Arbor, MI 48106
Shipping Address
4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
Electronic mail
Sales: sales@jobo-usa.com
Equipment & Processing Questions:  tech@jobo-usa.com
Repair Information: repair@jobo-usa.com
Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
 

Back to Top

 


jobo_logo_web.jpg (5206 bytes)

Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.

 

This page last updated on 03/20/02