Instructions For The JOBO CPE-2
Plus Processor
#4065 (CPE-2 Plus) &
#4069 (CPE-2 Plus Starter Kit)
Section 4

[CPE-2 Plus Starter Kit]
Back to Top
How to
Use This Manual
Information needed to operate your processor successfully
with a wide variety of processes is included in this instruction manual. We urge you to
read all the basic information contained in Section One and Section Two. Then read the pages of Section Three that describe the processes
you wish to use. If you are having problems with your processor or processing, see the
pages of Section Four. For conversions, tables and lists see Section Five.
If you have obtained this instruction manual as a replacement
to earlier editions, use the process recommendations in this web page (where they are
different), not the recommendations in the earlier manual(s). These instructions reflect
the changes that have been made in film, paper, and chemicals since the original book was
written. (If you already have processing procedures that completely satisfy you, don't
change them just to match the directions in this web page.)
There are three types of special notations or cautionary
information in this manual: Note, Caution, and Warning. The type and format of each is listed below:
Note: Text in this format is
informative. It contains additional details to explain the basic information presented.
Caution:
Text in this format presents important procedural information. Failure to follow these
instructions could adversely affect the processing of your film or paper.
WARNING:
Text in this format presents critical information. Possible damage to your equipment or
personal injury could result from not following these instructions!
Copyright:
Copyright © 1997 by JOBO Fototechnic, Inc. All rights
reserved. No portion of this web page may be reproduced in any form without express
written consent from JOBO Fototechnic, Inc.
Every effort was made to include up-to-date and accurate
information in this manual. All manufacturers, including JOBO, maintain the right to
change specifications for their products. Changes may be made to specifications without
notice. For the most current product specifications and usage, contact the manufacturer.
JOBO makes no claim for the accuracy or usability of other
manufacturers' information contained in this manual. The processing recommendations
included in this manual may not be optimal for every situation. If you require specific
results, test all process instructions for suitability.
JOBO is not liable for any damages, direct or consequential,
occurring from the use or misuse of information contained in this manual.
Credits:
Author: Damon Dean
JOBO Contributors: Ken Owen, Chris Mishler, Sam Proud,
Paul Rowe
Manual part number 66051. Revision 06/97.

[CPE-2 Plus]
Back to Top
Index:
Important Safeguards
Section 1: Introduction
Section 2: General Processing Instructions
Section 3: Specific Processes
Section 4: Troubleshooting (all are links to additional pages)
Section 5: Appendices
Back to Top
If you have any questions, contact us utilizing one of the
following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.com
Repair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
- Telephone (734) 677-6989
- Fax: (734) 677-6963
-
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com
- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
-
Back to Top