Instructions for the CPA-2 and
CPP-2 Processors
1. Processor Specifications; CPA-2 and CPP-2

[CPP-2]

[CPA-2]
Tempering bath capacity: 4.75 gallons (18
liters)
Base Area: 38 x 15 inches (96.5 x 38.1 cm),
including overhang
Chemical Solution Capacity: Four 260 ml (8
oz.) graduates; six 1000 ml (34 oz.) bottles
Voltage: 120 Volts, 60 cycles (Hz) AC
Power Consumption: 480 Watts, 4.4 Amps
Accommodates tanks/drums: All 1500, 2500,
2800, and 3000 series
Note:
Tanks or drums with a first or last digit of '3' only work
with the JOBO Lift accessory. Tanks with a last digit of '1' come with an attached magnet
(#1504.) All tanks or drums (except extension modules) with a last digit of '0' require a
magnet accessory (#1504), mounted on the bottom, to be used on the CPA-2 or CPP-2
Processor (without the JOBO Lift). The 1526 Combo Drum does not come with either a magnet
or cog. To use any of the above tanks or drums with the JOBO Lift (except the ones already
equipped with a cog), you must add a Cog (#1505). Install it in the lid of the tank or
drum.
Reels:
1501 (35 mm, 1 or 2 120, 220), 1502 (2 110, or 16 mm 5' or
1.5 M maximum), 1555 (35 mm Stainless Steel), 1557 (120 Stainless Steel), 1559 (220
Stainless Steel) 2502 (35 mm, 1 or 2 120, 220), 2509N (4 x 5", 6 x 9 cm, 9 x 12 cm,
up to six sheets), 2514 (4 x 5" Polaroid format, up to six sheets), 2517 (70 mm, 5'
or 1.5 M maximum), 2518 (2 1/4 x 3 1/4" up to six sheets) 3073 (35 mm x 26' or 8 M
maximum), 3075 (70 mm x 16.4' or 5 M maximum). See Appendix for table and illustrations of
tanks and reel capacity.
Accessories:
CPA-2/CPP-2 JOBO Lift (#4072); additional or replacement:
Black Bottle 1000 ml (#3372), White Bottle 1000 ml (#3373), Graduate 260 ml (3308), Color
Thermometer (#3321).
For other JOBO products that will enhance the use of your
processor, check your JOBO catalog, talk to your JOBO dealer, or call JOBO Customer
Service at (734) 677-6989, ext. 4721. Our
hours are from 8 a.m. to 5 p.m. Eastern Time, Monday through Friday, but our voice mail
answering system is available 24 hours a day. You may fax us at
(734) 677-6963. If you wish to write us, our address is:
JOBO Fototechnic, P. O. Box 3721, Ann Arbor, MI 48106-3721, USA. We will be happy to help
you.
Back to Top
Go To:
1. Processor Specifications; CPA-2 and CPP-2
2. Safety First
3. Differences Between the CPA-2 and the CPP-2
Processors
4. Processor Description
5. Cleaning the Processor
6. Processor Maintenance and Tips
7. Processing Instructions
for Film Using Magnet Drive
8. Processing Instructions
for Prints Using Magnet Drive
9. Processing Using the JOBO
Lift Accessory
10. Processing Instructions
With the JOBO Lift Accessory
11. Precautions for Film and
Paper Processing
12. Additional Processing
Information
13. Spare Parts
14. Fuse Replacement
For more detailed lift information, read the CPA-2/CPP-2 JOBO Lift Instruction Manual.
Back to Top
If you have any questions, contact us utilizing one of the
following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.com
Repair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
- Telephone (734) 677-6989
- Fax: (734) 677-6963
-
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com
- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
-
Back to Top