 |
 |
Instruction Manual
for the Fujimoto CP51
Roller Transport ProcessorIndex
Introduction
It is important to read completely through the following instructions before using the processor. Although the machine is easy to use, there are important aspects of it which may not be obvious without learning of them in this manual.
The Main Body plus either the Wash Dry Module or the Stabilize Dry Module make up a complete dry-to-dry print processor. However, the Main Body can be used alone, followed by manually washing and drying the prints after they come out of the Bleach/Fix.
Features of CP-51 Processor
- Consistent print development is ensured due to automatic chemical replenishment measuring both width and length of the paper, as well as automatic temperature control of solution temperatures.
- Print sizes from 3 x 4" to 20 x 30" can be processed.
- Once the light-tight cover of the processor has been closed, development can take place in daylight.
- Each solution bath needs only 6 liters of chemicals, keeping solution costs low.
- The roller-transport system enables quick and smooth print processing.
- Long life is assured for both the chemicals and rollers by a ventilation fan preventing excess condensation. Standby circuitry reduces aeration of the solutions while protecting the rollers, and magnetic circulation pumps minimizing oxidation by intermittently turning off the processor during unused periods of operation.
Index
- W/D Features and Specifications
- Installation of W/D
- Testing for Operation
- Preparation for Operation
- Maintenance
- S/D Features and Specifications
- Installation of S/D Module
- Testing for Operation
- Preparation for Operation
- Maintenance
If you have any questions, contact us utilizing one of the following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.comRepair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
JOBO Contacts
- Telephone (734) 677-6989
- Fax: (734) 677-6963
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
Back to Top
Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 03/20/02