 |
 |
Instructions for the
AutoLab ATL-500 #4235
and the
AutoLab ATL 800 #4237
11. MAINTENANCE
 |
 |
ATL-800 |
ATL-500 |
11. MAINTENANCE
The ATL-500/800 unit requires little maintenance. If the unit is not used for some time, it is wise to perform a cleaning program before processing film. Use a coupled tank without reels and fill the bottles with 700ml of clean water. The unit should be stored with all water drained out. The outside of the unit may be cleaned, but use a damp cloth only. Do not put the unit under running water for cleaning, do not use caustic detergents, and make sure no cleaning fluids enter the unit via the ventilation slots.
If you have any questions, contact us utilizing one of the following methods:
Equipment or Processing Questions:
- Phone: Customer Service Department (734) 205-9421
e-mail: tech@jobo-usa.comRepair Questions:
- Phone: Repair Department (734) 205-9420
- e-mail: repair@jobo-usa.com
JOBO Contacts
- Telephone (734) 677-6989
- Fax: (734) 677-6963
- Postal address
- P.O. Box 3721, Ann Arbor, MI 48106
- Shipping Address
- 4401 Varsity Drive, Suite D, Ann Arbor, MI 48108
- Electronic mail
- Sales: sales@jobo-usa.com
- Equipment & Processing Questions: tech@jobo-usa.com
Repair Information: repair@jobo-usa.com- Shipping or Billing Questions: help@jobo-usa.com
Webmaster: webmaster@jobo-usa.com
Back to Top
Send mail to webmaster@jobo-usa.com with questions or comments about this web site. Copyright © 1997-2005 JOBO Fototechnic, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright to all of the photographs displayed on this site is owned by each of the photographers. You may not sell, publish, license or otherwise distribute any photographs without the written permission of the photographer.
This page last updated on 03/20/02